2N Lift8 v1.6.0 - Manual (Page 225)

225
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Intercoms Menu Figure:
There are three tables to the right. Two of them are directly visible, the third has to be
switched on by clicking the Checking call heading. You can use filtration in all the
tables; refer to the Check Calls subsection below. The Responsible technicians table
displays the technicians responsible for the intercom administration and helps quickly
select and send the appropriate technician.
The Alarm calls table displays a list of alarm calls from the given intercom including the
call date/time (Timestamp), call-processing Agent and Note added during the alarm
call. The Checking call table shows all check calls from the given intercom since
intercom addition to the database. Each record includes its date/time and result.
Contacts
The left section of the menu displays a list of all users configured in the Contacts 2N
®
system. Click a user to open its card. The following information is displayed in the Lift8
middle of the window: Username, Firstname, Surname and Contact number. If the user
is assigned a contact number, just click Call to set up a call to this user. This opens the
Outgoing call window and the call will be made. See below for details on outgoing calls.
If the call cannot be set up, you will get a voice message.
Caution
For the purpose hereof, Technician means the user that is 2N Lift8
®
assigned the Technician user role. The other users (Admin, Operator or
Own role) are not displayed in this table.