Mounting, Product completeness check, Electronics mounting – 2N Lift8 v1.6.0 User Manual
Page 44
44
Product Completeness Check
Check the product for completeness before installation.
The cabin
package contains (assembled):
audio unit
1 electronics board
4 terminals slid onto the board; see the photo
1 jumper slid onto the board; see the cover printing
1 mounting panel
1 speaker connected directly or by cable
1 microphone connected directly or by cable
1 cover with printing
5 tightening straps
Mounting
Electronics Mounting
This
is intended for mounting behind the lift control panel. Typically, the
audio unit
panel is ready for installation as shown in the drawing below:
Figure: Mounting Hole Dimensions for Audio Unit – Cabin Universal
To mount the
, you need 4 electrically spot welded
or
screws, a
audio unit
M3
M4
sufficiently perforated speaker area and a microphone hole. In emergency, you can fix