Cu connection to telephone network, Pstn – 2N Lift8 v1.6.0 User Manual
Page 34
34
CU Connection to Telephone Network
You can connect the
to any of the following telephone networks:
CU
PSTN
PBX
GSM
UMTS
VoIP
PSTN
works in a broad band regardless of polarity and line parameters (refer to
2N Lift8
®
Technical Parameters). Connect it using the enclosed cable with an RJ–12 terminal. It
is the most reliable and simplest connection. The disadvantage is the operating cost
(fixed fee).
Caution
Only one
may be connected to one telephone line and no other end
CU
telephone equipment may be connected to the line including a product
through which the telephone line goes (so-called priority connection –
electronic burglar alarm, e.g.).
No dual or party lines may be used.
No telephone “multiplugs” (adaptors), even the smart ones, may be used.
Never connect
to an ISDN line.
2N Lift8
®