2N Lift8 v1.6.0 User Manual
Page 160
160
Figure:
User Messages – Messages Menu
The message list includes the message duration and two action buttons: Import
message from file and Delete. If a message is not recorded, its total time is 0:00. The
total time is displayed for each message recorded. Click on the import button to open a
file viewer on the disk to replace the selected message with a new, properly formatted
one. If you just select a message, a message player will become accessible to the right
for you to play the message. Standard player functions are available too. Press Play to
play the message. To record new messages, select the input source. When the
microphone icon shines red, start recording a new message, thus deleting the old one.
The menu is faded during message recording. The player displays the name, total time
and current state of the selected message, thus signalling active recording, playing or
recording stop. Click the 'Stop" icon to stop recording, Click 'Play' to check the recorded
or imported messages. If the message volume level is too low, adjust the input device
volume. If the volume is still very low, try to record the message using another device.
Having completed message editing, click To device to load the message set into the CU
connected. Click Save to directory to save the current set onto your PC disk. Select a
message and click the Trash icon to delete the message.
Note
The correct format for a message to be added is .WAV. No other files can
be recorded.
A message cannot be recorded until the input device is selected in the
recording settings.