2N Lift8 v1.6.0 User Manual
Page 122
122
981
Checking call
mode
0–5
0
0 = disabled
1 = enabled, the first call in
3 minutes and then as set
in parameter 983
2 = enabled, the first call in
2 hours and then as set in
parameter 983
3 = enabled, as set in
parameter 983
4 = enabled, the call on the
nearest day set in
parameter 986
5 =enabled, the first call in
3 minutes and then as set
in parameter 983
982
Checking call
interval
hhmmhhmm
00002359
Set announcements into
lower traffic (lower tariff)
time, generated at random
in the time interval.
983
Checking call
period
0–100 days
3 days
0 = disabled (0 in
parameter 981 has the
same effect), the value is
applied if parameter 981 is
set to 1–6.
986
Days of week
for checking
call
MTWTFSS
0000000
Values for Mon, Tue, Wed,
Thu, Fri, Sat, Sun:
0 = do not call
1 = call
Example:
1000100 = the checking
call will be made on
Mondays and Fridays.
991
Service
password
up to 16 digits:
0–9
12345
Change the default
servicing password for
access to programming via
the voice menu and for full
initialisation.
992
Rescue
password
up to 16 digits:
0–9
empty
Set the rescue terminating
password.
994
Enable 4-lift
version
0–1
0
0 = standard connection, 1
= connect up to 4 cabin
Audio Units to the CU
internal splitter as lifts 1–4
(refer to Subs. 4.5 for
details).
995
Allow
outgoing call
0–1
0
0 = disabled, 1 = enabled
(if the parameter is
enabled, the machine room
Audio Unit can be used for
outgoing public network
calls).