Before you start, Mounting, Product completeness check – 2N Lift8 v1.6.0 User Manual
Page 61
61
1.
2.
3.
4.
5.
Operation
This type of
is operated by qualified people (lift maintenance staff,
audio unit
e.g.).
Push the TRIPHONY button to activate voice communication with the other audio
of the same lift
units
.
Push the ALARM button, for example, when someone falls down the shaft.
The
calls the numbers configured in the ALARM memory – set 2
audio unit
(021–026).
The ALARM button illumination (not required by default) helps you find and
activate the
easily in the dark
audio unit
.
Before You Start
Product Completeness Check
Check the product for completeness before installation.
1 audio unit
2 wall plugs
2 wall plug screws
Requirements
This type of
has no specific requirements.
audio unit
Mounting
The
is typically mounted on a wall using the supplied wall plugs and screws.
audio unit
There is a drilling template in the product package.
Caution
If no number is specified in the ALARM memory – set 2 (021–026), the
dials the numbers defined in the ALARM memory – set 1
audio unit
(011–016).
Push the ALARM button to call the control room or machine room audio
configured as an intercom.
unit
The ALARM and TRIPHONY buttons shine even at relax.
Caution
The
is not intended for outdoor installations.
audio unit