Volume configuration, Handset connection – 2N Lift8 v1.6.0 User Manual
Page 63
Advertising
63
Handset Connection
Use the handset supplied with the
and the included cable with telephone
audio unit
terminals.
Volume Configuration
Open the protective door on the
and adjust the volume
audio unit
using the trimmer.
Caution
The
is powered via a 2-wire bus. Disconnection of these wires
audio unit
results in the
switch-off
audio unit
.
Caution
If the handset is not connected, the
works in the HandsFree
audio unit
mode.
A handset other than that supplied by the manufacturer may not work.
Caution
Use the trimmer to set the best acoustic properties eliminating feedback.
Volume configuration only works in the HandsFree mode.
Advertising