General – 2N Lift8 v1.6.0 User Manual
Page 202
202
The List of available lines displays all of the 8 lines to be configured. Each line includes
identification and state parameters: Domain specifies the domain with which the line is
registered, Active shows whether the line is currently on/off and Active calls counts the
current calls via the line. If Active calls is zero, there is no active incoming/outgoing
call on the line. The Active check call function is enabled for the first line.
Call Server Menu
Figure:
General
The
menu consists of two parts:
for all the lines and
. Server
General
Server
Line
provides the current SIP server state information: Maximum simultaneous calls
displays the maximum count of check calls to be processed by the server at the same
time. If more calls than as defined in the parameter arrives in the server at one
moment, all the excess calls will be rejected. Call server state signals the current state
of the server: Starting, Running, Waiting for reconfiguration and Error.
Caution
Set the SIP lines in the
Use the settings of the PC on
2N Lift8 Server!
®
which the server is installed instead of your PC settings. Your PC settings
will be applied only if the server runs locally.