Storage – 2N Lift8 v1.6.0 User Manual
Page 206
206
Click on the plan to display the preview. Click Show intercoms next to the Plan name to
view all the configured intercoms as an intercom symbol plus the phone number; see
the figure above. Click Remove plan to delete a plan. Click Change plan to update a
plan while keeping the plan name and the current intercom structure. Select Download
plan to save the plan without the intercom positions onto a local disk.
Storage
The
menu helps you configure all the storages necessary for the operation of
Storage
the
system services. You can map the storage folders on a local disc,
2N Lift8
®
network discs and such additional memories as USB discs and memory cards.
Caution
If, contrary to the figure, information is displayed instead of the plan list,
check the plan storage on the server. If the storage is not configured, set
its parameters in the Storage menu.
If the Storage menu is unavailable, enhance the user rights.
Note
Insert figures in the PNG, JPG or BMP format.
The file browser is configured for PNG by default. If you cannot see the
figures in the folder, change the file format (typically, in the right-hand
upper corner next to the file name).
Tip
Plan changing is useful when you need to update a plan after
reconstruction and interior changes while keeping the existing intercom
structure in the building.
Caution – exceeded maximum storage size
Plans are saved sequentially. The error displayed always relates to the
currently saved error-state plan, The other plans are queued for saving.
When the error is solved (by deleting of the 'defective' plan, e.g.), saving
can go on as the Save button keeps active.