2N Lift8 v1.6.0 - Manual (Page 41)

41
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Mounting Types
See below for the mounting types and necessary components. Install the device on
sites not exposed to water leakage or condensation.
Wall Mounting
Use appropriate wall plugs and screws for mounting (not included in the delivery).
Hang the device using the pre-drilled holes on the device bottom.
Figure: Wall Mounting
DIN Rail Mounting
Mount the device on a standard TS 35 DIN rail. The recommended DIN rail length is 14
cm.
Figure: DIN Rail Mounting