INFICON Sensistor ILS500 Leak Detection System - Manual (Page 10)

10 General Information
ninb63e1-f (1410)
1.3.2 Available Configurations
Sensistor ILS500
The actual configuration is shown on the ILS500 display during start-up and in the
menu when clicking Setup >> Info.
1.4 Disposal
Sensistor ILS500
Standard For common tracer gas leak detection.
High Pressure (HP) When a higher tracer gas pressure is needed.
Notice Start-up time for the leak detectors can be up to 10 minutes, depending
on the condition.
According to EU legislation, this product must be recovered for
separation of materials and may not be disposed of as unsorted
municipal waste.
If you wish you can return this INFICON product to the manufacturer
for recovery.
The manufacturer has the right to refuse taking back products that
are inadequately packed and thereby presents safety and/or health
risks to the staff.
The manufacturer will not reimburse you for the shipping cost.
Shipping address:
INFICON AB
Westmansgatan 49
582 16 Linköping
Sweden