INFICON Sensistor ILS500 Leak Detection System - Manual (Page 96)

96 Technical Data
ninb63e1-f (1410)
14.4.10 Connection Port
14.4.11 Leak Detector
Pin Signal Type Load Comment
1 +24 VDC SUPPLY 2.5 A
2 AUX1 - +/-1-5 A* Terminal 1 of safe relay contacts for
auxiliary external use.
3 AUX2 - +/-1-5 A* Terminal 2of safe relay contacts for
auxiliary external use.
4 Not used - - -
5 SAFESPLY** SUPPLY -2.5 A 24 VDC supply from EXTERNAL
emergency stop circuitry.
6 COM GND 1.0 A Common GND.
* 250 VAC 5 A cosj =1
30 VDC 5 A L/R = 0 ms
240 VAC 2A cosj = 0.3
24 VDC 1A L/R = 48 ms
** SAFESPLY feeds risk associated loads inside the ILS500. These include all gas
and tooling valves.
Connector: Probe connector.
Purpose: For connection of probe.
Cable: C21 Probe Cable.