INFICON Sensistor ILS500 Leak Detection System - Manual (Page 20)

20 System Examples
ninb63e1-f (1410)
5 System Examples
ILS500 is equipped with a large number of functions for connection and leak testing of
different kinds of objects. It is therefore possible to build a leak test station that suits the
tested object and the requirements on testing speed etc.
Three examples of test stations are given in the following sections.
5.1 Simple Hand Probe System
Simple Hand Probe System
In this system the operator is manually handling the Hand Probe for the leak test and
the test fixture (Tooling).
ILS500 ensures that the tracer gas correctly fills the entire object.
Filling and Gross Leak Test (if desired) are performed automatically and the gas leak
test is conducted manually by the operator.
An Active Holder for Hand Probe (option) can be used to ensure that the selected
minimum test time is used.
ILS500 will indicate LEAK if any of the tests fails.
1 Power Connection
2 Compressed Air Connection
3 Tracer Gas Connection
4 Evacuation and Gas Filling
5 Test Object
6 Hand Probe
7 Active Probe Holder (optional)
2
1
3
4
7
5
6