INFICON Sensistor ILS500 Leak Detection System - Manual (Page 27)

Setup 27
ninb63e1-f (1410)
6.3 Pneumatic Connections
6.3.1 Connecting Compressed Air
1 Use the hose to connect the compressor and the ILS500.
6.3.2 Connecting Tracer Gas
Caution
Make sure that compressed air is dry, well filtered and oil free. Recommended filter
grade is 5
μ m or finer. Inadequate filtering will result in increased maintenance.
Caution
Make sure to use adequate pressure and flow. For more information, see on page
86.
Warning
Pressurizing objects at too high pressures can result in a burst object. This in turn
can result in serious injury or even death. Never pressurize objects that have not
previously been burst tested or otherwise approved for the chosen test pressure.
Warning
Pure Hydrogen is a flammable gas. Only use ready-made Hydrogen Tracer Gas of
5% Hydrogen in Nitrogen. This is a standard industrial gas mixture used in various
industrial applications.