INFICON Sensistor ILS500 Leak Detection System - Manual (Page 97)

Technical Data 97
ninb63e1-f (1410)
14.4.12 USB Port
To access the USB port, remove the cover. See Removing the Cover on page 78.
Connector: 9 pin male D-sub.
Purpose: For downloading of APC drivers.
Cable: Standard female to female file transfer cable (null modem) for
downloading APC drivers.
Pin Signal Specification
1 Not used Standard RS232C
2 RD Data rate 115200 baud
3 TD Data bits 8
4 Not used Stop bits 1
5 SG Parity none
6 Not used Flow ctrl none
7 Not used
8 Not used
9 Not used
Connector: USB
Purpose: Used for import and export of recipes.