INFICON Sensistor ILS500 Leak Detection System - Manual (Page 71)

Troubleshooting 71
ninb63e1-f (1410)
START and STOP buttons
Hardware Test
STOP
Vacuum:
Pressure:
0.00 bar
bar
Press Start Button (Top Right)
0.00
OK?
This is a “manual” test. The test continues when the correct button is pressed. The test
checks the activated START and STOP buttons only. Use INPUT menu under Service
menu to check buttons that are turned off.
Hardware Test
STOP
Vacuum:
Pressure:
0.00 bar
bar
Press Stop Button (Bottom Right)
0.00
OK?