INFICON Sensistor ILS500 Leak Detection System - Manual (Page 28)

28 Setup
ninb63e1-f (1410)
1 Secure gas cylinder safely.
2 Open the cylinder valve briefly to blow out dirt that may have collected in the outlet.
3 Install the two stage gas regulator on cylinder.
4 Turn regulator fully counter clockwise for zero output pressure.
5 Connect a regular welding gas hose or similar between the Tracer Gas Port and the
pressure regulator. Check that the hose is certified to withstand the maximum output
pressure of the regulator.
6 Open cylinder valve and set regulator to desired pressure. See warning banner!
7 Open regulator outlet valve (if any).