INFICON Sensistor ILS500 Leak Detection System - Manual (Page 47)

Recipes 47
ninb63e1-f (1410)
Stand-By
1 Click on the Tooling Outputs to be activated in stand-by (between tests).
2 Choose how to move on to the next step.
- Set action in list.
- Select Tooling Inputs.
3 Set desired delay time.
Connection Step 1 — 3
1 Select the ON check box to activate the step.
2 Click on the Tooling Outputs to be activated.
3 Choose how to move on to the next step.
- Set action in drop-down-list.
- Select the appropriate check box(es) for the Tooling Inputs.
Then set “Open” or “Closed” status for each switch symbol.
4 Enter a text to describe the step (click the Info field to activate the on-screen
keyboard).
5 Set desired delay time.
Tooling Outputs
ON
Go to next step with
and Tooling Inputs
Delay
1 2 3 4
STAND-BY
0.0
Start Button
Connection Step 1
Tooling Outputs
ON
Go to next step with
and Tooling Inputs
Delay
1 2 3 4
0.0
Auto
ON
Info