6 setup, 1 placement of the ils500, Setup – INFICON Sensistor ILS500 Leak Detection System User Manual
Page 23: Placement of the ils500, 6setup
Advertising
Setup
23
ninb63e1-f (1410)
6
Setup
6.1
Placement of the ILS500
Place the ILS500 on a flat surface, as close as possible to the test fixture and
ventilation system.
Some free space must be provided around the ILS500 to enable maintenance and
service access.
Ensure that there is at least 350 mm (14 in.) of free space behind the ILS500 to enable
removal of service hatches, connection of supplies, test fixture etc.
Caution
Check that you comply with all relevant legislation and safety standards before
putting your ILS500 into service.
≥
350 mm (14 in.)
Notice
The front feet under the ILS500 can be flipped out to raise the front for a
better viewing angle.
Advertising