INFICON Sensistor ILS500 Leak Detection System - Manual (Page 94)

94 Technical Data
ninb63e1-f (1410)
14.4.7 Probe Control Port
3 EXTSTOP IN -7 mA Stop button return side (NO contact) or
contact to +24 VDC.
4 EVAC1 OUT 0.5 A Venturi valve output.
5 EVAC2 OUT 0.5 A Evacuation valve output.
6 GASFILL OUT 0.5 A Fill valve output.
7 OPTOUT OUT 0.5 A
8 COM GND -1.0 A Common GND for outputs.
Pin Signal Type Load Comment
Connector: 25 pin female D-sub
Purpose: For external connection of ISH2000.
Pin Signal Type Load Comment
1 COM GND -1 A Common GND for outputs.
2 COM GND -1 A Common GND for outputs.
3 COM GND -1 A Common GND for outputs.
4 IN_0 IN -0.5 mA Input of ISH2000 APC system.
5 IN_1 IN -0.5 mA Input of ISH2000 APC system.
6 IN_2 IN -0.5 mA Input of ISH2000 APC system.
7 IN_3 IN -0.5 mA Input of ISH2000 APC system.
8 IN_4 IN -0.5 mA Input of ISH2000 APC system.
9 CAL_CONF OUT 0.5 A Output of ISH2000 APC system.
10 OUT_6 OUT 0.5 A Output of ISH2000 APC system.
11 COM GND -1 A Common GND for outputs.
12 COM GND -1 A Common GND for outputs.
13 COM GND -1 A Common GND for outputs.
14 DET_ERROR OUT 0.5 A Output of ISH2000 APC system.
15 LEAK_OUT OUT 0.5 A Output of ISH2000 APC system.
16 DET_ON OUT 0.5 A Output of ISH2000 APC system.
17 DET_SIGNAL OUT 0.5 A Output of ISH2000 APC system.