INFICON CMS5000 Monitoring System - Manual (Page 155)

11 - 49
IP
N 07
4-
50
8-
P1
C
CMS5000 Operating Manual
11.6.8 Parameters
The options located in the Parameters tab include setting a startup method,
enabling the water adjustment and the auto baseline parameters, the check
standard auto calibration, the run time prompt, the summary report options and the
FTP logging. See
Figure 11-84 .
Figure 11-84 Parameters
For instructions on setting up and clearing the Startup method, see 5.5, Software
Setup .
To enable the water adjustment, check the Enable Water Adjustment box.
Checking this box adjusts the concentration calculations when using water
methods. These adjustments are necessary when the water temperature at the
time of calibration differs from the water temperature at the time of sampling in
order to accurately calculate the concentration of the sample. See
Figure 11-85 .