INFICON CMS5000 Monitoring System - Manual (Page 162)

11 - 56
IP
N 07
4-
50
8-
P1
C
CMS5000 Operating Manual
11.8.2 Bring Online
If the CMS5000 is not communicating when connecting through the ethernet cable,
clicking on the Bring Online option will attempt to re-establish communication. If
the connection has been manually disabled, clicking Bring Online will re-enable
the connection. When the connection is active, the CMS5000 Sensor icon will not
be overlaid with an "X" .
11.8.2.1 Communication Messages
If the PC is not communicating with the CMS5000, there are three types of "X"s that
may be displayed.
The red "X" signifies that communication was suddenly lost. For example, an
ethernet cable was disconnected.
The blue "X" signifies that communication has yet to be established.
The gray "X" signifies that communication has been disabled through CMS IQ by
using the Disconnect option.
11.8.3 Disconnect
The Disconnect option will manually disconnect the PC from the CMS5000 and
will remain disconnected until Bring Online is selected.