INFICON CMS5000 Monitoring System - Manual (Page 54)

5 - 10
IP
N 07
4-
50
8-
P1
C
CMS5000 Operating Manual
5.4 FTP Connection
Up to three FTP servers, each with its own unique IP address, user name and
password, can be configured to upload data files and can be enabled or disabled
independently. If a FTP server is enabled, the CMS5000 will maintain a queue on
which to upload data files. After each run, the CMS5000 will upload the files onto
the queues. If the CMS5000 cannot connect or login to an FTP server, the data file
will be stored in the queue until another data file is ready to be uploaded. At this
point, the CMS5000 will attempt to upload both the new and the previous data file.
If there is a loss of power, the data files will continue to be stored in the queues.
However, if a data file is deleted by a user prior to uploading, the CMS5000 will not
transfer the file to the FTP server. The CMS5000 also has an option to clear the
files in the queue if the data is no longer desired.
1 Verify that the PC will connect to the FTP server. If the PC can connect to both
the FTP server and the CMS5000, it can be configured to upload data files.
2 To verify the connection, first open Internet Explorer. See Figure 5-20 .
Figure 5-20 FTP Server