INFICON CMS5000 Monitoring System - Manual (Page 35)

4 - 1
IP
N 07
4-
50
8-
P1
C
CMS5000 Operating Manual
Chapter 4
Setting Up Laptop Communication
4.1 Introduction
Communication must be established between the CMS5000 and the PC in order
to run analysis and review data from the laptop. It is necessary to use the laptop to
calibrate the CMS5000 methods and setup software parameters.
4.1.1 Setting Up Laptop Communications
NOTE: Setting up communication is an Advanced User function. To change the
access level, see section 11.2.5.1, Set Access Level, on page 11-18 .
1 Open CMS IQ Software. From the System drop-down menu, select
Properties. See
Figure 4-1 .
Figure 4-1 Selecting Properties from the System Drop-down Menu
2 Click the CMS5000 List button. See Figure 4-2 .
Figure 4-2 CMS5000 List Button