INFICON CMS5000 Monitoring System - Manual (Page 182)

12 - 20
IP
N 07
4-
50
8-
P1
C
CMS5000 Operating Manual
Figure 12-34 Relocated Base Point
6 Verify the update by opening Show/ Update Current Peaks. Refer to section
12.7.5.2, Show/Update Current Peaks, on page 12-18 . Alternately, select
section 12.7.5.5, Label the Peaks, on page 12-21 to view the updated peak
area.
12.7.5.4 Clear the Peaks
The fourth option on the Peaks submenu is Clear the Peaks. Refer to Figure 12-26
on page 12-15 . The Clear the Peaks option removes the peak identification arrows
and base points from the graph. See Figure 12-35 .
Figure 12-35 Clear the Peaks