5 label the peaks, 6 change search parameters, Nu. see – INFICON CMS5000 Monitoring System User Manual
Page 183: Section 12.7.5.6, change search, To view the
Advertising
12 - 21
IP
N 07
4-
50
8-
P1
C
CMS5000 Operating Manual
12.7.5.5 Label the Peaks
The fifth option on the Peaks submenu is Label the Peaks. The Label the Peaks
option will display the retention time and the area of each peak. See
.
Figure 12-36 Label the Peaks
12.7.5.6 Change Search Parameters
The sixth option on the Peaks submenu is Change Search Parameters. The
Change Search Parameters option displays the Peak Search Parameters and
allows for modification of the peak resolution, the noise level multiplier, the
minimum peak width for identification, the maximum peak width for identification,
the minimum TIC and RIC (area). See
Advertising