INFICON CMS5000 Monitoring System - Manual (Page 249)

16 - 19
IP
N 07
4-
50
8-
P1
C
CMS5000 Operating Manual
16.3.3 Peak Search Section
Figure 16-36 Peak Search Section
Search . . . . . . . . . . . . . . . . . . . . . . . When Calibrate is selected, search performs
the calibration of the library and calculates
response factors.
Recalculate . . . . . . . . . . . . . . . . . . . Recalculates the peak areas and response
factors without performing a peak search.
This is most useful after manual editing of
peak baseline points.
Start . . . . . . . . . . . . . . . . . . . . . . . . . Initiates Search or Recalculate.
16.3.4 Calibrate Options
Figure 16-37
Build/Edit Template . . . . . . . . . . . . When selected, identifies analytes and
retention times to build the calibration library
template.
Calibrate Library. . . . . . . . . . . . . . . When selected, data files are processed to
calibrate the library.
16.3.5 Analytes
Figure 16-38 Analytes
Analytes in Library . . . . . . . . . . . . . Displays the analytes in the library.
Analytes in File . . . . . . . . . . . . . . . . Displays the analytes in the currently
displayed or selected file.