INFICON CMS5000 Monitoring System - Manual (Page 52)

5 - 8
IP
N 07
4-
50
8-
P1
C
CMS5000 Operating Manual
15 Underneath Peak Search, verify that Search is selected. Click on Start to run
the calibration. See
Figure 5-17 .
Figure 5-17 Running Calibration
16 Click on the Analytes in File tab to view the area counts for the data file.
Ensure that an area count is displayed for the analyte. Then, save the method
by clicking Save. See
Figure 5-18 .
Figure 5-18 Analytes in File Tab
17 The check standard calibration is now complete.