INFICON CMS5000 Monitoring System - Manual (Page 77)

6 - 1
IP
N 07
4-
50
8-
P1
C
CMS5000 Operating Manual
Chapter 6
Status Button
6.1 Introduction
The STAT button provides real time data regarding various system parameters.
These parameters include the SYS (system) option, the TIME (time) option, the
NET (network) option, the STAT (status) option and the FIRM (firmware) option.
6.2 SYS Option
The first option, SYS, provides system information including the Hostname, Serial
Num (Number), Version number, Built on (build date), Free Disk space, and the
Startup method. The Hostname is used for PC communication, and the Serial
Num is the serial number of the unit that is used for identification. Version displays
the version of CMS5000 software that is loaded onto the system. The date and time
that the software was released is located in the Built on field. Free Disk is the
amount of free disk space available for data storage and the last entry is the
Startup which is the method that will automatically run when turning on the unit.
See
Figure 6-1 . Navigate through the SYS options by using the UP and DOWN
buttons.
Figure 6-1 SYS Option