INFICON CMS5000 Monitoring System - Manual (Page 64)

5 - 20
IP
N 07
4-
50
8-
P1
C
CMS5000 Operating Manual
5.5 System Integration
The current system I/O integration allows only input commands. This includes the
selection and start of a method created in the CMS IQ software. See
section 5.6,
Setting Startup Methods , for details on how to input methods. For more advanced
integration details, please contact INFICON.
5.6 Setting Startup Methods
The CMS5000 can be operated automatically. In the Parameters tab, a Startup
Method, a method that will automatically run when powering on the system, can
be selected. Additionally, a method sequence can be selected as a startup method.
See
section 5.8 on page 5-25 for information on creating a method sequence.
1 Double-click the Status icon, which is located on the System Setup screen of
CMS IQ. See
Figure 5-43 .
Figure 5-43 Status Icon
2 Click on the Parameters tab. See Figure 5-44 .
Figure 5-44 Parameters Tab