INFICON SQC-310 Thin Film Deposition Controller - Manual (Page 25)

Chapter 2 Operation
2-6
To delete a layer, highlight it in the Layer Select menu and press Cut/Paste.
On the Cut/Paste menu, press Cut to remove the layer. Press Prev Menu to return to
the Layer Select menu.
Cut/Paste Menu
To
Main
Prev
Menu
Process 25 -> Layer 1 -> Film 1
Layer
Film1
Film
Layer 1.1
Copy
Cut
Layer 1.2 Film2
Layer 1.3 Film3
Layer 2.1 Film4
To move or duplicate a layer, highlight it in the Layer Select menu and press Cut/Paste.
On the Cut/Paste menu, press Cut to remove the layer to memory (or press Copy to
save a copy to memory without removing the layer). A copy of the layer is saved to the
cut/paste clipboard memory. Without leaving the Cut/Past menu, highlight the layer that
you want to insert the cut layer above and press Paste Normal or Paste Codep.
Operations on the Cut/Past menu can be repeated several times. Each cut operation
overwrites the cut/paste memory. Pressing Prev Menu on the Cut/Past menu returns to
the Layer Select menu. The contents of copy/paste memory are lost!
Note: Once a film is assigned to a process layer, you cannot change the film. Instead,
cut the layer, then insert a new layer and select the desired film.