INFICON SQC-310 Thin Film Deposition Controller - Manual (Page 78)

Chapter 5 Communications
5-10
Get Sensor Thickness
Command: N
Description: Returns the thickness reading for the requested sensor.
Parameters: Sensor Number
Example: To Get Sensor 1 thickness, send: N1
The return string is of the form: 1.000
Get Output Thickness
Command: O
Description: Returns the average thickness of all sensors assigned to the requested
output.
Parameters: Output Number
Example: To Get Output 1 thickness send: O1
The return string is of the form: 1.000
Get Sensor Frequency
Command: P
Description: Returns the frequency of the requested sensor.
Parameters: Sensor Number
Example: To Get Sensor 1 frequency, send: P1
The return string is of the form: 5543210.0