INFICON MDC-360C Thin Film Deposition Controller - Manual (Page 25)

MDC-360C DEPOSITION CONTROLLER
GENERAL DESCRIPTION 1-7
1.4 ACCESSORIES
The table below lists the most popular options and accessories. Refer to INFICON
Price List for more accessories and other products.
Part Number Description
179215 Dual Source/Sensor Board
179216 Passive I/O Board
179217 IEEE-488 Communication Board
179218 Internal Storage Data/Time Clock
179219 RS-232 to RS-485 conversion
179220 Remote Power Handset
179239 Active I/O Board
123200-5 SH-102 Sensor Head, cables, and
carousel of 10 each 6MHz Gold SC-
101 sensor crystals
124201-4 SO-100 Oscillator with 6" and 10'
BNC Cables.
130200-2 IF-111 Instrument Feedthrough, 1" O-
Ring with 1 electrical connector and
dual 3/16" water tubes.
130204-2 IF-276 Instrumentation Feedthrough,
2 3/4" Conflat® Flange seal with 1
electrical connector and dual 3/16"
water tubes.
150902 SF-120 Combination Sensor Head,
Feedthrough, Cables, Crystals and
Oscillator.
123204-1 Internal Coax Cable 30".
123204-2 Internal Coax Cable 60".
124202-1 BNC Cable Assembly 10'.
124202-2 BNC Cable Assembly 20'
124204 BNC Cable Assembly 6".
103220 SC-101 Carousel of 10 each 6MHz
gold sensor crystals.
103221 SC-102 Carousel of 10 each 6MHz
silver sensor crystals.