Leica Biosystems CM1950 - Manual (Page 10)

10 Instructions for Use V 1.5 RevF - 08/2014
Fig. 2
• Lift the carton (2) straight up and tip toward the back to remove.
• Remove the foam transport anchors (3).
• Remove the dust cover (4).
• Remove the accessory carton (5).
To remove the metal strips (1), you
need metal shears and suitable
gloves. Stand next to the crate and cut
the strips at the location shown
(see Fig. 3 "  ").


Fig. 3
1
2
3 3
5
6
Fig. 4
Caution when re-
moving the metal
strips!
There is a risk of
injury (the strip
has sharp edges
and is under ten-
sion)!
2. Safety and Design
4
When the instrument is delivered, check the tilt indicators on the
packaging.
If the arrowhead is blue, the shipment was transported laying flat,
was tilted at too great an angle or fell over during transport.
Note this on the shipping documents and check the shipment for
possible damage.