Leica Biosystems CM1950 - Manual (Page 61)

61 Leica CM1950 – Cryostat
Fig. 68
Fig. 69
8
If the sectioning results are not satisfactory, the
knife holder can be shifted sideways in order to
use another part of the blade.
To do so, follow these steps:
1. Release the clamping lever (8) by folding it
back and move the knife holder back until the
desired position is reached (3-point click stop
enables you to accurately find a new cutting
position).
2. Fold the clamping lever (8) forwards for clamp-
ing.
11. Optional Accessories
Lateral shift for blade holder CE
Knife holder CN with
glass anti-roll guide
Once the blade has been removed from the blade
holder, it is disposed of into the dispenser con-
tainer ( storage compartment in bottom, Fig. 68 ),
or according to laboratory regulations.
Fig. 69a
The safety gloves included in the stan-
dard scope of delivery must be worn
when disposing of the blade!