Leica Biosystems CM1950 - Manual (Page 27)

27 Leica CM1950 – Cryostat
6.5 Installing accessories/inserting chamber accessories
6.5.1 Installing the adjustable footrest (optional)
• To install the optional footrest, the screws (1)
must be unscrewed using the size 3 Allen key
provided.
1
• Attach the holders (2) for the footrest on the left
and right to the front wall of the housing from
the outside. To do so, use the Allen screws
you used earlier. Ensure that the screws are
tight.
• Hook the footrest (3) into the installed holder
according to individual requirements (height).
• Once installed, the user can adjust the height of
the footrest at any time by relocating it (3) to the
desired height on both sides in the holder (2).
2
3
6. Installation
When installing the holder (2), ensure
that the cutout faces downwards so that
the support (3) can be hooked in.
Fig. 20