Lenze E82EV 8200 - Manual (Page 107)

Mechanical installation
Mounting with thermal separation (push−through technique)
4
l
107 EDK82EV113 DE/EN/FR 11.0
Cutout in the control cabinet
a1
a2 a3
b3
b3
b2
8200vec310
Dimensions [mm]
8200 vector a1 a2 a3 b2 b3
E82DV302K2C
E82DV402K2C
80 +1 50 15
224 +1 23
E82DV552K2C
E82DV752K2C
123 +1 75 24
E82DV302K4C
E82DV402K4C
80 +1 50 15
E82DV552K4C
E82DV752K4C
123 +1 75 24
E82DV113K4C
Mounting
1.
Slide earthing clamps on the frame with the correct sides:
– The contact springs have to point towards the rear panel of the control cabinet.
– The cutouts of the seal specify the positions.
2. Insert 8200 vector into cutout.
3. Tighten by means of 4 screws M4x10.
– Tightening torque: 1.7 Nm (15 lb−in)