Lenze E82EV 8200 - Manual (Page 84)

l
84 EDK82EV113 DE/EN/FR 11.0
Scope of supply
Position Description
0 8200 vector frequency inverter
1 Label (required for mounting in accordance with UL) ^ 104
2 Support for standard fastening ^ 104
3 EMC shield sheet with shield clips for the motor cable and for the motor temperature
monitoring feed cable ^ 116
4 2−pole terminal strip for motor PE and motor shield at X2.1 ^ 116
5 EMC shield sheet with fixing screws and shield clamp for shielded control cables ^ 116
6 Plug connector 2*13 pole for function modules on FIF interface ^ 131
X1.1 Mains connection and DC supply
(integrated terminal strip) ^ 117
^ 118
X1.2 Terminal strip for relay output ^ 124
X2.1 Motor connection, brake resistor connection (option)
(integrated terminal strip)
^ 123
X2.2 Terminal strip for PTC connection or thermal contact (NC contact) of the motor
X3.1 Special version: Terminal strip for feedback contact − only for "safe standstill"
E82EVxxxKxCx4x variant ^ 125
Mounting instructions
Interfaces and displays
Position Description Function
 2 light−emitting diodes
(red, green) Status display ^ 155
‚ AIF interface
(automation interface) Slot for communication modules ^ 133
E82ZBC keypad, XT EMZ9371BC keypad
Fieldbus communication module type EMF21xx...,
e.g. PROFIBUS−DP EMF2133IB
ƒ FIF interface
(function interface) With cover for operation without function modules
Or slot for function modules ^ 131
Standard I/O PT E82ZAFSC010
Application I/O PT E82ZAFAC010
Fieldbus function modules type E82ZAFxC...,
e.g. PROFIBUS−DP PT E82ZAFPC010
I
Tip!
Information and auxiliary devices related to the Lenze products can be found in the
download area at
http://www.Lenze.com