Sicherheitshinweise, Warnings – Lenze E82EV 8200 User Manual
Page 19
Sicherheitshinweise
Sicherheitshinweise für die Installation nach UL oder UR
l
19
EDK82EV113 DE/EN/FR 11.0
Sicherheitshinweise für die Installation nach U
L
oder U
R
J
Warnings!
ƒ
Motor Overload Protection
–
For information on the protection level of the internal overload protection for a
motor load, see the corresponding manuals or software helps.
–
If the integral solid state motor overload protection is not used, external or remote
overload protection must be provided.
ƒ
Branch Circuit Protection
–
The integral solid state protection does not provide branch circuit protection.
–
Branch circuit protection has to be provided externally in accordance with
corresponding instructions, the National Electrical Code and any additional codes.
ƒ
Please observe the specifications for fuses and screw−tightening torques in these
instructions.
ƒ
E82xV302K2C ... E82xV752K2C (3.0 kW ... 7.5 kW, 240 V devices):
–
Suitable for use on a circuit capable of delivering not more than 5000 rms
symmetrical amperes, 240 V maximum, when protected by fuses.
–
Suitable for use on a circuit capable of delivering not more than 50000 rms
symmetrical amperes, 240 V maximum. When protected by CC, J, T or R class fuses.
–
Shall be installed in a Pollution Degree 2 macro−environment.
–
Maximum surrounding air temperature: 0 ... +55 °C
–
> +40 °C: reduce the rated output current by 2.5 %/°C
–
Use 60/75 °C or 75 °C copper wire only.
ƒ
E82xV302K4C ... E82xV113K4C (3.0 kW ... 11 kW, 400/500 V devices):
–
Suitable for use on a circuit capable of delivering not more than 5000 rms
symmetrical amperes, 500 V maximum, when protected by fuses or circuit
breakers (E82xV302K4C only).
–
Suitable for use on a circuit capable of delivering not more than 50000 rms
symmetrical amperes, 500 V maximum. When protected by CC, J, T or R class fuses
–
Shall be installed in a Pollution Degree 2 macro−environment.
–
Maximum surrounding air temperature: 0 ... +55 °C
–
> +40 °C: reduce the rated output current by 2.5 %/°C
–
Use 60/75 °C or 75 °C copper wire only.