Commissioning, Selection of the correct operating mode – Lenze E82MV 8200 motec 0.55kW-2.2kW User Manual
Page 110
T
Commissioning
Selection of the correct operating mode
EDK82MV222 DE/EN/FR 9.0
L
NNM
léÉê~нбеЦ гзЗЙл кЙЕзггЙеЗЙЗ Сзк лн~еЗ~кЗ ~ййдбЕ~нбзел
qЬЙ СзддзпбеЦ н~ДдЙ ЬЙдйл узм нз СбеЗ нЬЙ ЕзккЙЕн зйЙк~нбеЦ гзЗЙ Сзк лн~еЗ~кЗ
~ййдбЕ~íáçåëW
Application
Operating mode
Single drives
Setting in C0014
recommended
alternatively
With extremely alternating loads
4
2
With high starting duty
4
2
With speed control (speed feedback)
2
4
With high dynamic response (e. g. positioning and infeed drives)
2
-
With torque setpoint
5
-
With torque limitation (power control)
2
4
Three-phase AC reluctance motors
2
-
Three-phase sliding rotor motors
2
-
Three phase motors with assigned frequency-voltage characteristic
2
-
Pump and fan drives with square-law load characteristic
3
2 or 4
Group drives
(several motors connected to one controller)
Identical motors and identical loads
2
-
Different motors and/or changing loads
2
-
`MMNQ Z OW дбеЙ~к sLС ЕЬ~к~ЕнЙкблнбЕ Езенкзд
`MMNQ Z PW ëèì~êÉJä~ï sLc ЕЬ~к~ЕнЙкблнбЕ Езенкзд
`MMNQ Z QW оЙЕнзк Езенкзд
`MMNQ Z RW лЙелзкдЙлл нзкимЙ Езенкзд