Lenze E82MV 8200 motec 0.55kW-2.2kW - Manual (Page 119)

Commissioning
The most important codes for commissioning
T
EDK82MV222 DE/EN/FR 9.0
NNV L

kçíÉ>
z
qЬЙ СзддзпбеЦ н~ДдЙ ЗЙлЕкбДЙл бе ЗЙн~бд нЬЙ ЕзЗЙл гЙенбзеЙЗ бе
нЬЙ Йс~гйдЙл Сзк ЕзггбллбзебеЦ>
z
aз езн ЕЬ~еЦЙ ÅçÇÉëI нЬЙ гЙ~ебеЦ зС пЬбЕЬ бл мевезпе нз
узм> ^дд ЕзЗЙл ~кЙ ЗЙлЕкбДЙЗ бе ЗЙн~бд бе нЬЙ póëíÉã j~åì~äK
eзп нз кЙ~З нЬЙ ЕзЗЙ н~ДдЙ
Column Abbreviation Meaning
Code Cxxxx Code Cxxxx z The parameter value of a code can be
different in every parameter set.
z Parameter value accepted immediately
(ONLINE)
1 Subcode 1 of Cxxxx
2 Subcode 2 of Cxxxx
* Parameter value of the code is the same in all parameter sets
 Keypad E82ZBC Changed parameters will be accepted after
pressing 
Keypad XT
EMZ9371BC
Changed parameters will be accepted after
pressing 
 Keypad E82ZBC Changed parameters will be accepted after
pressing  if the controller is inhibited
Keypad XT
EMZ9371BC
Changed parameters will be accepted after
pressing  if the controller is inhibited
(A) Code, subcode or selection are only available when using an
Application-I/O
uSEr With Lenze setting the code is available in the USER-menu
Name Name of the code
Lenze Lenze setting (value at delivery or after restoring the delivery state
with C0002)
Æ Further information can be obtained from ”IMPORTANT”
Selection 1 {%} 99 Min. value {unit} Max. value
IMPORTANT - Brief, important explanations