Lenze E82MV 8200 motec 0.55kW-2.2kW - Manual (Page 99)

Motor mounting
Wiring according to EMC requirements
P
EDK82MV222 DE/EN/FR 9.0
VV L
`зеЗбнбзел Сзк íêçìÄäÉJÑêÉÉ зйЙк~íáçåW
z
bñÅÉéí Сзк нЬЙ г~бел Е~ÄäÉI млЙ лЬбЙдЗЙЗ Е~ДдЙл çåäóK
z
qЬЙ лЬбЙдЗ гмлн ДЙ Е~кЙСмдду ЕзееЙЕнЙЗ нз mbK
z
`зееЙЕн гзнзк ~еЗ г~бел mb ЕзеЗмЕнзкл нз лЙй~к~нЙ mb нЙкгбе~длK
^
e
_
uN
a
8200mot101
`
uO
d
c
cáÖK NM
b
Shield connection
1. Prepare cable
2. Route the cable
through the eyebolt
of the shield and
bend the eyebolt.
3. Tighten the screw.
The shield must be
tightly connected to
the shield sheet.
0.7 Nm
6 lb-in
PES
 Mains cable L1, L2, L3, PE
 PE connection - mains cable
 PE connection - motor
 Shielded control cable
 Shield connection for control cable (screw shield to shield sheet)
 PE connection - terminal strip X2
 Isolated terminal (e.g. star point for motor star connection)
 Function module
X1 Terminal strip - mains connection
X2 Terminal strip - motor connection
PES HF shield connection by connecting the shield with a surface as large as possible to PE