Lenze E82MV 8200 motec 0.55kW-2.2kW - Manual (Page 121)

Commissioning
The most important codes for commissioning
T
EDK82MV222 DE/EN/FR 9.0
NON L
Code IMPORTANT Possible settings
No. Selection Lenze Name
C0002*

uSEr
(cont.)
Parameter set
transfer using
the keypad
Keypad Ö PAR1 (+ FPAR1) Overwrite selected parameter
set and, if necessary, FPAR1
with the corresponding
keypad data
71 With function module
Application-I/O, INTERBUS,
PROFIBUS-DP, LECOM-B,
DeviceNet/CANopen
11 With all other function modules
Keypad
Ö PAR2 (+ FPAR1)
72 With function module
Application-I/O, INTERBUS,
PROFIBUS-DP, LECOM-B,
DeviceNet/CANopen
12 With all other function modules
Keypad
Ö PAR3 (+ FPAR1)
73 With function module
Application-I/O, INTERBUS,
PROFIBUS-DP, LECOM-B,
DeviceNet/CANopen
13 With all other function modules
Keypad
Ö PAR4 (+ FPAR1)
74 With function module
Application-I/O, INTERBUS,
PROFIBUS-DP, LECOM-B,
DeviceNet/CANopen
14 With all other function modules
Controller
Ö Keypad All available parameter sets
(PAR1 ... PAR4, and FPAR1)
are copied to the keypad
80 With function module
Application-I/O, INTERBUS,
PROFIBUS-DP, LECOM-B,
DeviceNet/CANopen
20 With all other function modules
Keypad
Ö Function module Overwrite the
module-specific parameter
set FPAR1 only
40 Only with function module
INTERBUS, PROFIBUS-DP,
LECOM-B, DeviceNet/CANopen
Function module
Ö Keypad Copy the module-specific
parameter set FPAR1 only
50 Only with function module
INTERBUS, PROFIBUS-DP,
LECOM-B, DeviceNet/CANopen