Rockwell Automation 1756-OF8I ControlLogix Eight-channel Isolated Analog I/O Modules User Manual
Page 107
Advertising
Rockwell Automation Publication 1756-UM540A-EN-P - May 2014
107
Install ControlLogix Isolated Analog I/O Modules
Chapter 6
Complete these steps to install an I/O module.
1.
Align the circuit board with the top and bottom chassis guides.
2.
Slide the module into the chassis until the module locking tab clicks.
Printed Circuit Board
20861-M
Locking tab
20862-M
Advertising
This manual is related to the following products: