Rockwell Automation 1756-OF8I ControlLogix Eight-channel Isolated Analog I/O Modules - Manual (Page 173)

Rockwell Automation Publication 1756-UM540A-EN-P - May 2014 173
Appendix
A
Isolated Analog I/O Module Tag Definitions
Module tags are created when you add a module to the Logix Designer
application project. The set of tags associated with any module depends on the
module type and the connection type. There are three sets of tags for
each module:
• Configuration
• Input
• Output
Access the Tags You can view tags from the Tag Editor. Complete the following steps.
1. Open your Logix Designer application project.
2. Right-click Controller Tags and choose Monitor.
Topic Page
Access the Tags 173
1756-IF8I Module Tags 175
1756-IRT8I Module Tags 182
1756-OF8I Module Tags 191