Limit configuration tab – Rockwell Automation 1756-OF8I ControlLogix Eight-channel Isolated Analog I/O Modules User Manual
Page 133
Advertising
Rockwell Automation Publication 1756-UM540A-EN-P - May 2014
133
Configure ControlLogix Isolated Analog I/O Modules
Chapter 7
Limit Configuration Tab
The Limit Configuration tab is available with only the 1756-OF8I module. You
use this tab to configure clamp limits and module ramping.
IMPORTANT: Changes to the High Engineering and Low Engineering values on
the Configuration tab do not change the Clamp values on this tab, when Clamp
Limits are enabled.
Advertising
This manual is related to the following products: