Rockwell Automation 1756-OF8I ControlLogix Eight-channel Isolated Analog I/O Modules - Manual (Page 30)

30 Rockwell Automation Publication 1756-UM540A-EN-P - May 2014
Chapter 2 ControlLogix Isolated Analog I/O Module Features
Exact Match
Exact Match Keying requires all keying attributes, that is, Vendor, Product Type,
Product Code (catalog number), Major Revision, and Minor Revision, of the
physical module and the module created in the software to match precisely to
establish communication. If any attribute does not match precisely, I/O
communication is not permitted with the module or with modules connected
through it, as in the case of a communication module.
Use Exact Match keying when you need the system to verify that the module
revisions in use are exactly as specified in the project, such as for use in highly-
regulated industries. Exact Match keying is also necessary to enable Automatic
Firmware Update for the module via the Firmware Supervisor feature from a
Logix5000 controller.
EXAMPLE In the following scenario, Exact Match keying prevents I/O
communication:
The module configuration is for a 1756-IB16D module with module revision
3.1. The physical module is a 1756-IB16D module with module revision 3.2.
In this case, communication is prevented because the Minor Revision of the
module does not match precisely.
IMPORTANT Changing electronic keying selections online can cause the I/O
Communication connection to the module to be disrupted and can result in
a loss of data.
ANALOG INPUT
ST 0 1 2 3 4 5 6 7 ST 8 9 10 11 12 13 14 15 O
K CAL
OK
OK FORCE SD RUN
Logix5575
RU N REM PROG
DC INPUT DC INPUT
FLT 8 9 10 11 12 13 14 15
ST 0 1 2 3 4 5 6 7
ST 8 9 10 11 12 13 14 15 O
K FLT 0 1 2 3 4 5 6 7
DIAGNOSTIC
Module Configuration
Vendor = Allen-Bradley
Product Type = Digital Input Module
Catalog Number = 1756-IB16D
Major Revision = 3
Minor Revision = 1
Physical Module
Vendor = Allen-Bradley
Product Type = Digital Input Module
Catalog Number = 1756-IB16D
Major Revision = 3
Minor Revision = 2
Communication is prevented