Rockwell Automation 1756-OF8I ControlLogix Eight-channel Isolated Analog I/O Modules - Manual (Page 119)

Rockwell Automation Publication 1756-UM540A-EN-P - May 2014 119
Install ControlLogix Isolated Analog I/O Modules Chapter 6
Complete the following steps to remove the RTB.
1. Unlock the locking tab at the top of the module.
2. Open the RTB door by using the bottom tab.
3. Hold the spot marked PULL HERE and pull the RTB off the module.
Remove the Module
from the Chassis Complete the following steps to remove a module from its chassis.
1. Push in the top and bottom locking tabs.
2. Pull the module out of the chassis.
IMPORTANT Do not wrap your fingers around the entire door. A shock hazard exists.
20855-M
20856-M
20857-M