Rockwell Automation 1756-OF8I ControlLogix Eight-channel Isolated Analog I/O Modules - Manual (Page 135)

Rockwell Automation Publication 1756-UM540A-EN-P - May 2014 135
Configure ControlLogix Isolated Analog I/O Modules Chapter 7
4. Click Copy Channel Configuration.
5. Click the channels to which you want to copy channel configuration and
click OK.
The configuration is copied to the other channels.
6. Click OK or Apply for the new channel configuration to take effect.
TIP If desired, you can apply configuration changes to the first channel, as
described in
step 3 , before moving to the next step and copying
channel configuration.
We recommend that you copy channel configuration before applying
the changes. In this manner, the controller sends the changes to the
module only once and, therefore, needs to make only one connection
to the module.