Rockwell Automation 1770, D17706.5.16 Ref Mnl DF1 Protocol Command - Manual (Page 190)

10–19 Diagnostic Status Information
Publication 1770Ć6.5.16 - October 1996
1785ĆKE Status Bytes
Bytes Bits Contents Description
1 all Operating status of PLC processor. For the 1785ĆKE, this byte is always 0.
2 0 - 3 Type of interface module and processor E = Check interface module expansion byte (byte3)
4 - 7
yp p
F = Computer
3 all Interface Module Expansion Byte 19 = 1785ĆKE
4 all 00 = not used
5 - 6 all This is a pointer to the Active Node
Table
low byte first.
7 - 8 all This is a pointer to diagnostic counters low byte first.
9 0 - 4 Series and revision level of the module 0 = Revision A
1 = Revision B, etc.
5 - 7 0 = Series A
1 = Series B, etc.
10 0 - 1 Settings of the option switched on the 0 = 57,600 bits per second Data Highway Plus baud rate
2
g p
module
DSR
3 - 7 Option Switch Settings; bit set to 0 is ON